|
|
|
Solar Water Heater Products |
| |
| solar collector |
Model:SC-H |
| Heat pipe series
solar collectors
|
|
| The SIDITE Solar Collector or Solar Water Heater is a device that absorbs solar energy from the sun and converts it into usable heat energy. The heat is normally absorbed by water, or a freeze resistant water mix, which can then be used to supplement hot water heating, space heating. |
| |
| |
Model:SC-U |
U type series solar collectors
|
|
| Evacuated tubes convert solar energy into heat energy, that is transferred to U pipe by an aluminum fin with high solar energy absorption and low heat radiance loss,Liquid (antifreezing liquid or water) in the Upipe heats up,and the U pipe conducts thermal energy to the water inside the storage tank ditectly (or through internal copper coil),With a testing pressure of 1.2 MPa, Working pressure is 0.6MPa |
|
| |
|
Model:SC-V |
Non-pressure series collectors
|
|
|
|
|
| | |
Split solar water heater |
|
Once heat-exchange solar waer heating systems (SS-M0)
|
|
| The split solar water heater is an active system, because it uses a pump with a controller to circulate the fluid between the heat pipe series solar collector and the storage tank, tank and solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can installed anywhere of the building. The piping between the main ......
|
|
|
|
Twice heat-exchange solar water heating systems (SS-M1)
|
| The split solar water heater is an active system, because it uses a pump with a controller to circulate the fluid between the heat pipe series solar collector and the storage tank, tank and solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can installed anywhere of the building. The piping between the main ......
|
|
|
|
Twice heat-exchange solar water heating systems (SS-M2)
|
| The split solar water heater is an active system, because it uses a pump with a controller to circulate the fluid between the heat pipe series solar collector and the storage tank, tank and solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can installed anywhere of the building. The piping between the main ......
|
|
|
| Pre-heating solar water heater |
|
Pre-heating solar water heaters (SP-C)
|
SIDITE offers a range of high quality tanks designed especially for "Pre-heating". These tanks can be used in combination with existing electric/gas mains pressure water heaters, or even as stand alone low pressure hot water systems with the addition of electric elements or external gas boosting.
Ideal for use as low pressure thermal stores, the SIDITE pre-heating is available with the addition internal coil heat exchanger. |
|
|
Pressurized_solar_water_heater.jpg)
|
Integrative pressurized solar water heater (SP-H)
|
| Sidite has developed a water heater which combines heat pipe solar collector and storage tank into one product. The condenser of the heat pipe tube is directly inserted into the non-rorroding coper protection tube within the water tank.The heat pipe wvacuated tube collect heat with high efficiency transforming of the incoming solar irradiation into heat. The condenser tansfers the generated heat to the manifold where the water is heated. Thereafter, the hot water is circulating in the system until the system attains the required temperature....
|
|
|
| Thermosiphon solar water heater |
Model:SD-A |
Thermosiphon solar water heater (SD-A)
|
The details of material:
Evacuated tube: High quality borosilicate glass 3.3, Φ47×1500, Φ58×1800/2100, Φ70×2100
Inner tank:SUS304-2B stainless steel plate
Outer tank: Colour steel plate
Insulating layer: Polyurethane foam
Bracket: Aluminium alloy
Capacity of tank: 75L 100L 125L 150L 200L 225L |
|
|
|
Thermosiphon solar water heater (SD-G)
|
The details of material:
Evacuated tube: High quality borosilicate glass 3.3, Φ47×1500, Φ58×1800/2100, Φ70×2100
Inner tank:SUS304-2B stainless steel plate
Outer tank: Colour steel plate
Insulating layer: Polyurethane foam
Bracket: Galvanized steel plate
Capacity of tank: 75L 100L 125L 150L 200L 225L 250L 300L |
|
|
|
Thermosiphon solar water heater (SD-S)
|
The details of material:
Evacuated tube: High quality borosilicate glass 3.3, Φ47×1500, Φ58×1800/2100, Φ70×2100
Inner tank:SUS304-2B stainless steel plate
Outer tank: Colour steel plate
Insulating layer: Polyurethane foam
Bracket:Stainless steel plate
Capacity of tank: 75L 100L 125L 150L 200L 250L 300L |
|
|
| |
Model: SD-T
|
Non-pressure solar water heater (SD-T) |
The details of material:
Evacuated tube: High quality borosilicate glass 3.3, Φ47×1500, Φ58×1800/2100, Φ70×2100
Inner tank:SUS304-2B stainless steel plate
Outer tank: Colour steel plate
Insulating layer: Polyurethane foam
Bracket: Galvanized steel plate
Capacity of tank: 75L 100L 125L 150L 200L 225L 250L 300L |
|
| |
| All-glass vacuum tube |
Model:SE-N |
Normal vacuum tube (SE-N) |
| Just like an automobile engine,the computer CPU,vacuum tube is the core component of the solar water heater. Its performance lies on the actual film coating technology. SIDITE Company adopted a new graded coating technology of Qinghua University,and tube raise the heat....
|
|
|
Model:SE-N |
Three-target tube (SE-T) |
Just like an automobile engine, the computer CPU, evacuated tube is the solar water heater. Its performance lies on the coating technology, The three-target evacuated tube rise the heat more than 12%...
|
| |
| Heat-pipe vacuum tube |
Model:SE-H |
Heat-pipe vacuum tube (SE-H)
|
|
| Heat pipes might seem like a new concept, but you are probably using them everyday and don't even know it. Laptop computers often using small heat pipes to conduct heat away from the CPU, and air-conditioning system commonly use heat pipes for heat conduction. |
| |
|
