Solar Products
 
Solar collector
  Heat pipe series (SC-H)
  U type series (SC-U)
  Non-pressure series (SC-V)
  Adjustable frame solar collector(SC-HAJ)
  Metal glass heat pipe solar collector
Split solar water heater
  Once heat-exchange
  Twice heat-exchange(SS-M1)
  Twice heat-exchange(SS-M2)
  Split solar water heater
Pre-heating solar water heater
Integrative pressurized
  Integrative pressurized(SP-F)
  Integrative pressurized(SP-H)
Thermosiphon solar water heater
  solar water heater (SD-A)
  solar water heater (SD-G)
  solar water heater (SD-S)
  solar water heater (SD-T)
  solar water heater (SD-GH)
  solar water heater (SD-GJ)
All-glass vacuum tube
  Normal vacuum tube (SE-N)
  Three-target tube (SE-T)
 
 
 
Accessories
 
 
 
 
Accessories
Solar Water Heater Controller
 

  Type:SR510

  Introduce:

  Suitable  for  integrated  un-pressurized  solar  system

  • Main technical data
    1. Dimension: 210 mm x 145mm x 40mm
    2. Self power consumption:<3W
    3. Measuring accuracy of temperature:±2℃
    4. Temperature range of measurement:0~99℃
    5. Maximum power of controlled pump:≤600W
    6. Power of accompanied electrical heating wire:≤800W
    7. Power of auxiliary electrical booster:≤2000W(standard collocation)、≤3000W
        (not standard, selection available)
    8. DC 12V, AC 220V, pressurized valve and un-pressurized valve are available for selection
    ※Operation pressure of pressurized valve: 0.02Mpa~0.8Mpa, suitable for providing water directly
    ※Operation pressure of un-pressurized valve: 0.0Mpa , connected with water tank or low
       pressure water providing.

  • Main functions
    1. Water temperature display
    2. Water level display
    3. Water level pre-setup
    4. Manual water loading
    5. Temperature controlled water loading
    6. Timing water loading
    7. Water loading when tank is lack of water
    8. Compulsive water loading
    9. Increasing Water pressure during water is loaded.
    10. Water temperature pre-setup
    11. Manual heating
    12. Timing heating
    13. Hot water circulation
    14. Hot water pipe insulation
    15. Low pressure protection
    16. Collector tube protection

Solar controller System description
 
 

  Type:SR609

  Introduce

  suitable for integrated pressurized solar system

  • Main technical data
    1.Dimension: 170mmX128mmX40mm
    2.Self power consumption: <2W
    3.Measuring accuracy of temperature: ±2℃
    4.Temperature range of measurement: 0~99℃
    5.Power of auxiliary electrical booster ≤2000W

  • Main functions
    1.Time display
    2.Temperature display
    3.Timing heating at three time sections
    4.Manual heating
    5.Memory protection when power is failure
    6.Trouble indication of sensor

Solar controller System description
 

Type:SR868C6

Introduce

suitable for separated pressurized solar system

  • Main technical data
    1.Dimension: 120mmX120mmX18mm
    2.Self power consumption: <3W
    3.Measuring accuracy of temperature: ±2℃
    4.Temperature range of measurement: 0~120℃
    5.Power of temperature difference controlled circulation pump≤600W
    6.Power of time controlled circulation pump≤600W
    7.Power of auxiliary electrical booster ≤2000W

  • Main functions
    1. Clock display
    2. Temperature difference on/off
    3. Maximum tank temperature
    4. Frost protection5. Temperature controlled hot water circulation pump
    6. Time controlled hot water circulation pump
    7. Temperature controlled auxiliary heating during three time section
    8. Protection functions ( a. Memory protection, b. anti-bacteria protection )
    9. Changed between“℃/ OF”

Solar controller System description
 
 
 
 
 
 
  TEL:+86-573-83224422 / 83225522 | FAX:+86-573-83225533 | Feedback
Address: Yuxin industrial park, Nanhu Region, jiaxing City, Zhejiang Province,China
| Site Map
Powered By HAIBO. Copyright © 2009 SIDITE Solar Water Heater