china solar water heater

Sidite solar water heater

Home About us Products Project News Join in Service Contact us About solar heating FAQ Chinese
  Solar collector Split solar water heater
Pre--heating Integrative Pressurized Thermosiphon Solar water heaters Vacuum tube Heat pipe Accessories
Sitemaps

|

Contact
You are here:SIDITE solar water heater Global
   Solar project
  1. Space heating
  2. Pool heating
  3. solar water heating system
Solar collector
1. Heat pipe series (SC-H)
2. U type series (SC-U)
3. Non-pressure series (SC-V)
Split solar water heater
1. Once heat-exchange (SS-M0)
2. Twice heat-exchange(SS-M1)
3. Twice heat-exchange(SS-M2)
Pre-heating solar water heater
Integrative pressurized (SP-H)
Thermosiphon solar water heater
1. solar water heater (SD-A)
2. solar water heater (SD-G)
3. solar water heater (SD-S)
  4. solar water heater (SD-T)
All-glass vacuum tube
1. Normal vacuum tube (SE-N)
2. Three-target tube (SE-T)
Heat-pipe vacuum tube (SE-H)

Space heating

Sidite solar water heating systems

Sidite new Energy enterprise is a supplier of renewable energy not only distribution product, but also provid clients with.
completely energy solutions. Besides the solution of solar water heating system, which is the most economical, reliable and competitive, other solutions such as solar floor heating system, solar pool heating are also available. Sidite new energy enterprise is committed to supplying multiple energy solutions for you.

In multiple applications such as this, a special twin coil DHW tank is often used. This tank has a coil at the bottom of the tank connected to the Thermomax Collector which heats the domestic hot water in the tank. The coil at the top of the tank is connected to the other application but only allowed to function when the tank temperature is above a set temperature, say 130ºF.

In this configuration the domestic hot water tank becomes a double heat exchanger, providing solar heat for the Radiant Underfloor System, as well as solar Domestic Hot Water.

Operation:

The Solar Loop operates normally with a Differential Controller to heat the Twin Coil Tank through the bottom heat exchange coil.

In the Radiant Underfloor Loop the pump activates through the zone valves when either Room Thermostat calls for heat.
This loop flows through the top coil in the tank. If the upper tank is below, say, 130ºF boiler controller redirects the flow through the boiler, activating the boiler at the same time. This preserves hot water in the tank for domestic use.

The bypass, incorporating a Mixing Valve and check valve, ensures that the floor system cannot overheat by mechanically recirculating it when a set temperature is reached.

Normally the set temperature of the immersion heater (just below the top coil in the tank) is set far enough below the boiler set temperature to ensure that the radiant system only takes the solar heat from the tank. In emergencies the immersion heater could be used to supplement the floor heat by raising the immersion heater set point.


COPYRIGHT(C) 1999-2007 SIDITE. ALL RIGHTS RESERVED.WWW.SIDITE-SOLAR.COM
Home   |  About SIDITE   |  Solar Products   |  Solar project   |  Service   |  Contact us   |  FAQ   |  Join in   |  Chinese   |  link   |  Sitemap
ZHEJIANG SIDITE NEW ENERGY CO.,LTD    Tel:+86-573-83624433 83225522      Fax:+86-573-83225887     China Solar Water Heater Manufacturers - SIdite Solar